Lithium Cycles RSS

Masking and stencilingIf using masking techniques (with, say, masking tape) or stenciling after an initial coat, always wait 20 minutes before adding masking or a stencil to make sure the paint is dry enough not to be pulled away on removal.Masking can sometimes create lines where paint has built up against the edge of the mask: again wait 20 minutes so as not to pull that build-up away on removal of the stencil/mask.Leave for at least 2 hours to dry, and remove excess colour coat by rubbing down with a soft cloth. Masking difficult areasSometimes masking small or intricate areas...